Why do rectangular rounded corrugated expansion joints have rounded corners In the D2000 standard, most of the rectangular rounded corrugated expansion joints are full-height waves or half-height waves. According to the "CE" standard and general products, a new type of power plant flue duct

Performance Analysis of TA Series Corrugated Expansion Joint TA2 is an industrial titanium with a single alpha phase. Industrial pure titanium is divided into three grades: TA1, TA2 and TA3 according to its impurity content. The interstitial impurity elements of these three kinds of industrial pure

1. Selection of corrugated expansion joint a. The corrugated expansion joint is only undergoes axial deformation, the stress on both ends is large, the middle part tends to deform to the side at any time. The compensation amount of each wave is generally only about 5-20mm, so the wave of the expans

1.Why corrugated expansion joints are made of stainless steelThe main performance of the compensator includes: compensation amount, elastic stiffness, compressive strength, stability, fatigue strength, etc. The general design of thermal pipe network requirement is to meet the strength, stability, an