What is a loose flange?The looper flange is the movable flange piece, which is generally matched with the water supply and drainage fittings (the most common on the expansion joint). The equipment is bolted. What is a flangeFlange is a disc-shaped part, the most common in pipeline engineering, flang

There are several popular transverse corrugated expansion joints, such as: large tie rod corrugated compensator, small tie rod corrugated compensator, pulverized coal three-way corrugated expansion joint three-dimensional corrugated compensator, etc. As well as tie rods and other parts, it can absor

Most of the rectangular rounded corrugated expansion joints are full-height or half-height wave in the DD2000 standard. According to the "CE" standard and general products and combined with the special conditions of my country's power plants, the new power plant flue duct flexible pipes are develope

Compensation formula:Compensation calculation formula: X=a*L*△Tx is the expansion of the pipelinea is the coefficient of linear expansion, take 0.0133mm/mL Compensation pipeline (the distance between the fixed supports of the compensation pipeline) length△T is the temperature difference (medium temp

Several data that are particularly important in the customization of the bellow compensatorThe corrugated compensator is a compensating device that uses the effective expansion and contraction of the elastic element of the corrugated compensator to absorb the dimensional changes of pipelines, condui

Corrugated compensator, also called expansion joint, or expansion joint. It is composed of bellows and end pipes, brackets, flanges, conduits and other accessories that constitute the main body of its work. Mainly used in various pipelines, it can compensate the thermal displacement of the pipeline,

The bellows compensator plays a role in compensating for the displacement caused by thermal expansion and cold contraction in the pipeline system. In addition to the incorrect installation method, the bellows compensator will fail during use. What are the reasons Will the bellows compensation fail?

1. Before installing the compensator, check its model, specification and pipeline configuration, and it must meet the design requirements.2. For the compensator with inner sleeve, attention should be paid to make the direction of the inner sleeve consistent with the flow direction of the medium, and