Filling Compacted Composite Universal Spherical Compenstor
Filling compacted composite universal spherical compensator, mainly rely on the angular displacement of sphere to absorb or compensate lateral displacement from one or more directions. The filling compacted composite universal spherical compensators should be used in pairs, there’s no compensation capability when single set compensator used, but the filling compacted composite universal spherical compensator can make use of universal joint pipeline. Large amount of compensation capacity, small fluid resistance and deformation stress, no blind plate force and the acting force on the fixed bearing is small. In addition to these merits, filling compacted composite universal spherical compensators are also heat-resistant, anti-corrosion and long-lasting. At the same time, add the filler device with this advanced technology, making the sealing performance of spherical compensators more stable and reliable. Even leakage caused by long-running happens, you may not need to stop gas and reduce pressure to maintenance, the filling compacted composite universal spherical compensator is very convenient and quick. Especially for heating of long-distance transport, there are obvious economic and social benefits. If you need a long-distance transport, you are necessary to choose the filling compacted composite universal spherical compensator, as it can save money.
Features
1. Easy design and convenience installation, variety of layout forms such as horizontal, vertical, inclined and so on.
2. Large amount of compensation, small footprint, install in a distance of 200-500 meters as one group normally, small number of compensators and mounting brackets required and low costs of investment.
3. The sphere can be rotated around center of it, and also can be folded to bend in any direction, plurality of directions can be compensated.
4. Self-balance of internal pressure thrust or blind plates force, small force to the mounting bracket, not exist instability, water hammer phenomenon in pipeline.
5. High safety and good sealing performance, resistance to high temperature, high pressure and corrosion , high resilience, low coefficient of friction, long use life up to 30 years.
6. Overall welding, high-strength structure of spherical,strength of product is greatly increased.
7. Abrasion-resistant and high-hard glossy protective coating technology take on thesurface of sphere, to improve abrasion and corrosion resistance ability, reduce the frictional resistance of ball rotation greatly.
8. Easy maintenance,examine and repair under normal operating conditions with temperature and pressure can be achieved at any time.
Main Specifications
· Working pressure: 0.6-30 MPa
· Working temperature: -50℃-650 ℃
· Full fold flexion angle: ± 15 °
· Medium: hot water,steam,cooling water,circulating water and other fluids
· Sealing materials friction coefficient: ≤0.15
Application
· Bend pipe part.
· Complex mountainous terrain or urban pipe network.
· Deformation of pipe network due to ground subsidence or earthquake.
· Large amount of compensation and space is restricted in the pipe network.
· Long pipe line, and requires a small pressure loss of the pipe network.
· Across the road or bridge and other special requirements of the pipe network.
· Inlet duct which need to restrict took loads of sensitive equipment.
· Adopt active joints (universal joints) in pipeline of the pipe network.
· Special occasion solve pipeline’s deformation caused due to various reasons.
