Availability: | |
---|---|
Quantity: | |
DN15~DN1200
Fustar
40169910
Rubber Expansion Joint
Fustar rubber expansion joint are produced in accordance with the "Flexible Rubber Joints" chemical industry standard HG/T2289-1992. The EPDM NBR NR rubber expansion joint are featured with good resistance to high temperature, acid/alkali and high pressure.
Rubber expansion joint is also called rubber compensator, which is generally made of waveform rubber compensation parts and metal flanges. Loose sleeve structure is used for the flange and the rubber compensation part is composed of rubber surface and the inner layer made of strong fiber or steel strip or steel wire. The reinforced fibers or steel strip (wire) layer is extended to the rubber flange part inside which there is a hard steel skeleton.
Technique Parameter
Nominal Diameter DN | Length mm | Axial Displacement | Horizontal Displacementmm | Dellexion angle (α1+α2) | ||
mm | in | Extension mm | Compression mm | |||
32 | 1 1/4 | 95 | 6 | 9 | 9 | 15’ |
40 | 1 1/2 | 95 | 6 | 10 | 9 | 15’ |
50 | 2 | 105 | 7 | 10 | 10 | 15’ |
65 | 2 1/2 | 115 | 7 | 13 | 11 | 15’ |
80 | 3 | 135 | 8 | 15 | 12 | 15’ |
100 | 4 | 150 | 10 | 19 | 13 | 15’ |
125 | 5 | 165 | 12 | 19 | 13 | 15’ |
150 | 6 | 180 | 12 | 20 | 14 | 15’ |
200 | 8 | 210 | 16 | 25 | 22 | 15’ |
250 | 10 | 230 | 16 | 25 | 22 | 15’ |
300 | 12 | 245 | 16 | 25 | 22 | 15’ |
350 | 14 | 255 | 16 | 25 | 22 | 15’ |
400 | 16 | 255 | 16 | 25 | 22 | 15’ |
450 | 18 | 255 | 16 | 25 | 22 | 15’ |
500 | 20 | 255 | 16 | 25 | 22 | 15’ |
600 | 24 | 260 | 16 | 25 | 22 | 15’ |
700 | 28 | 260 | 16 | 25 | 22 | 15’ |
800 | 32 | 260 | 16 | 25 | 22 | 15’ |
900 | 36 | 260 | 16 | 25 | 22 | 15’ |
1000 | 40 | 260 | 18 | 26 | 24 | 15’ |
1200 | 48 | 260 | 18 | 26 | 24 | 15’ |
Features
• Good displacement compensation capability being able to carry out axial, lateral and angular displacement.
• Low noise, good vibration reducing and corrosion resistant capacity.
• High pressure resistance, good elasticity, excellent displacement effect and simple installation.
Applicable Industries
The rubber expansion joint can be widely used in the fields of water supply/drainage, HVAC, fire protection, compressors, paper making, pharmaceutical, shipbuilding, water pumps, fans and other piping systems. It can be applied to the following industries:
• High-voltage combined electrical industry
• Shipbuilding and marine diesel engine
• Power industry
• Heat pipeline network industries
• Petrochemical industry
• Cement industry
• Metallurgical industry
• Category: Single sphere rubber compensator, double spheres rubber compensator, threaded connection rubber compensator.
Rubber Expansion Joint
Fustar rubber expansion joint are produced in accordance with the "Flexible Rubber Joints" chemical industry standard HG/T2289-1992. The EPDM NBR NR rubber expansion joint are featured with good resistance to high temperature, acid/alkali and high pressure.
Rubber expansion joint is also called rubber compensator, which is generally made of waveform rubber compensation parts and metal flanges. Loose sleeve structure is used for the flange and the rubber compensation part is composed of rubber surface and the inner layer made of strong fiber or steel strip or steel wire. The reinforced fibers or steel strip (wire) layer is extended to the rubber flange part inside which there is a hard steel skeleton.
Technique Parameter
Nominal Diameter DN | Length mm | Axial Displacement | Horizontal Displacementmm | Dellexion angle (α1+α2) | ||
mm | in | Extension mm | Compression mm | |||
32 | 1 1/4 | 95 | 6 | 9 | 9 | 15’ |
40 | 1 1/2 | 95 | 6 | 10 | 9 | 15’ |
50 | 2 | 105 | 7 | 10 | 10 | 15’ |
65 | 2 1/2 | 115 | 7 | 13 | 11 | 15’ |
80 | 3 | 135 | 8 | 15 | 12 | 15’ |
100 | 4 | 150 | 10 | 19 | 13 | 15’ |
125 | 5 | 165 | 12 | 19 | 13 | 15’ |
150 | 6 | 180 | 12 | 20 | 14 | 15’ |
200 | 8 | 210 | 16 | 25 | 22 | 15’ |
250 | 10 | 230 | 16 | 25 | 22 | 15’ |
300 | 12 | 245 | 16 | 25 | 22 | 15’ |
350 | 14 | 255 | 16 | 25 | 22 | 15’ |
400 | 16 | 255 | 16 | 25 | 22 | 15’ |
450 | 18 | 255 | 16 | 25 | 22 | 15’ |
500 | 20 | 255 | 16 | 25 | 22 | 15’ |
600 | 24 | 260 | 16 | 25 | 22 | 15’ |
700 | 28 | 260 | 16 | 25 | 22 | 15’ |
800 | 32 | 260 | 16 | 25 | 22 | 15’ |
900 | 36 | 260 | 16 | 25 | 22 | 15’ |
1000 | 40 | 260 | 18 | 26 | 24 | 15’ |
1200 | 48 | 260 | 18 | 26 | 24 | 15’ |
Features
• Good displacement compensation capability being able to carry out axial, lateral and angular displacement.
• Low noise, good vibration reducing and corrosion resistant capacity.
• High pressure resistance, good elasticity, excellent displacement effect and simple installation.
Applicable Industries
The rubber expansion joint can be widely used in the fields of water supply/drainage, HVAC, fire protection, compressors, paper making, pharmaceutical, shipbuilding, water pumps, fans and other piping systems. It can be applied to the following industries:
• High-voltage combined electrical industry
• Shipbuilding and marine diesel engine
• Power industry
• Heat pipeline network industries
• Petrochemical industry
• Cement industry
• Metallurgical industry
• Category: Single sphere rubber compensator, double spheres rubber compensator, threaded connection rubber compensator.
Home | Products | About Us | Certificates | News | Application | Contact Us | Hot products